Smart Radio Family

 

The Smart Radio is a tiny, full-featured 2×2 MIMO radio/mesh router. It has Ethernet and UART interfaces to allow easy integration into any system architecture. Smart Radios can stream 4K video from over 10 km away. See the full index of all form factor compatible and interchangeable models available in the 100 MHz ~ 4 GHz range.

The Smart Radio employs Doodle Labs proprietary BII® technology (Broadband for Industrial IoT) with state-of-the-art RF and networking capabilities to enable IIoT developers leverage powerful 2×2 MIMO to communicate further, faster, more reliably and in any frequency band than ever before.

Key Features 
STATE-OF-THE-ART PERFORMANCE RF
  • Interference resistant COFDM/MIMO for improved link quality in busy RF environments
  • Long range (up to 20 km) with up to 2W (33 dBm) RF power
  • Adaptive per packet radio modulations and RF power to maximize link performance in dynamic environments
  • Software defined channel size of 3~40 MHz for efficient re-use of spectrum
  • Software defined operating frequency band for global applications
  • Exceptional Multipath and NLOS performance
  • Convolutional Coding, Forward error correction (FEC), ACK re-transmits for robust data transmission over noisy spectrum
  • Maximal Ratio Combining and beam forming for diversity antenna gain
  • Spatial Multiplexing for enhanced throughput
  • Space Time Block Coding for increased robustness
  • Time Division Duplex (TDD) for bi-directional traffic
ADDITIONAL FEATURES
  • Very small size, weight, and power (SWaP) for mobile applications
  • Available in 100 MHz – 4 GHz frequency range in form factor compatible interchangeable models
  • Regulatory compliance for unwanted spurious emissions
  • Rugged construction, Industrial temperature range (-40C to +85C)
  • Field proven and deployed in critical applications
  • COTS – Commercial off the Shelf
  • Extended lifespan with planned long availability
ADVANCED NETWORK
  • Low latency and High data throughput (up to 80 Mbps)
  • Low Latency Ultra Reliable Channel (URLLC) for Command and Control traffic
  • Optimized Video Streaming channel
  • Self-healing/self-forming mobile mesh for highly reliable network with redundancy
  • End-to-end IP architecture for distributing unicast and multicast traffic
  • Fast hand-off for mobile applications
  • 256-bit AES data encryption for over the air data security
  • Firewall – MAC/IP/protocol/port filtering for restricted access control
  • Embedded network management diagnostics APIs
  • Over the air firmware upgrade
  • Ethernet, UART interfaces to allow easy integration into various architectures
TARGET APPLICATIONS
CUSTOMER SUCCESS STORIES
MODELS INDEX

The table below lists the Smart Radio models. Additionally, we can configure the operating frequency anywhere from 100 MHz to 4 GHz for 1 or 2 stream MIMO and meet wide variety of band/channel plans for special project requirements. Please contact us with your requirements.  

Frequency Range (MHz)DescriptionAvailability/
Model No.
902-928

License Free ISM Band – USA, Canada, Mexico, Central, South and Latin Americas, Australia, New Zealand and China

The 900 MHz band is license free for use in many countries around the world. At lower frequencies, the radio signals can travel farther and penetrate through the walls and vegetation, providing better NLOS operation. The 900 MHz band provides an excellent alternative to the crowded 2.4 GHz Wi-Fi band. The Smart Radio is used by many UAS and Ground Robotic Systems.

Several models are available with 2×2 MIMO and features to match the project budget, Ethernet and UART interfaces, Longer than 20 Km range, upto 80 Mbps TCP/IP throughput, Up to 30 dBm RF power, FCC and IC Certification

View 915 MHz Smart Radio Datasheet
1350-1390

Federal L-Band

L-Band Smart Radios were designed for use by Military (1350 – 1390 MHz) and Overseas customers. The longer wavelength of the L-Band allows to reach further distances with omni-directional antennas, which is ideal for UAS applications.

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, Software defined 3/5/10/20 MHz channel BW, upto 80 Mbps TCP/IP throughput, Up to 30 dBm RF power

View L-Band Smart Radio Datasheet
1435-1510

Federal Band

This frequency range usually requires special configuration to match the project specifications. Please contact us and we can explore how best we can support your requirements.

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, Software defined 3/5/10/20 MHz channel BW, upto 80 Mbps TCP/IP throughput, Up to 30 dBm RF power 

Contact US
1670-1710

Federal Band

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, 3/5/10/20 MHz channel BW, upto 80 Mbps TCP/IP throughput, Up to 30 dBm RF power

RM-1690 Datasheet
1780-1850

Federal Band

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, 3/5/10/20 MHz channel BW, upto 80 Mbps TCP/IP throughput, Up to 30 dBm RF power

RM-1815 Datasheet
2025-2105

Broadcast Auxiliary Stations Band (BAS Band)

BAS Band Smart Radio is designed for use by TV and radio stations in applications such as live event video streaming and electronic news gathering. The BAS Band Smart Radio allows broadcasters to use their licensed spectrum without monthly fees. Verified for FCC Part 74 compliance.

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, 6/12 MHz channel BW, upto 50 Mbps TCP/IP throughput for multiple 4k video streams, Up to 33 dBm RF power for long range

View BAS band Smart Radio Datasheet
2200-2300

Federal S-Band

Smart Radio for S-Band is ideal for use by Federal agency in (2200 – 2300 MHz) frequency range. This radio is ideal for cities, where users can take advantage of the S-Band wavelength for superior RF reflections and penetration in urban environments.

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, Software defined 3/5/10 and 20 MHz channel BW, upto 80 Mbps TCP/IP throughput, Up to 33 dBm RF power for long range

View S-Band Smart Radio Datasheet
2400-2482

License free ISM Wi-Fi band (Worldwide)

Wi-Fi Smart Radio is fully compatible with all the Smartphone and mobile devices. These Smart Radios are used for long range and deployments in the harsh environments.

Several models with 2×2 MIMO Streams and features to match the project budget, Ethernet and UART interfaces, 3/5/10/20/40 MHz channel BW, upto 100 Mbps TCP/IP throughput, Up to 33 dBm RF power, FCC, CE and IC certified

View Wi-Fi Smart Radio Datasheet
2483-2495

Federal Band

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, 3/6/12 MHz channel BW, upto 50 Mbps TCP/IP throughput, Up to 33 dBm RF power

Contact US
3300-3400

Communication Band, Europe

Available in 2×2 MIMO Streams, Ethernet interface, 3/5/10/20 MHz channel BW, upto 80 Mbps TCP/IP throughput, Up to 27 dBm RF power

Contact US
3400-3600

Communication Band, Europe

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, 3/5/10/20 MHz channel BW, upto 80 Mbps TCP/IP throughput, Up to 27 dBm RF power

RM-3500 Datasheet
3600-3800

Communication Band, Europe

Available in 2×2 MIMO Streams, Ethernet and UART interfaces, 3/5/10/20 MHz channel BW, upto 80 Mbps TCP/IP throughput, Up to 27 dBm RF power

RM-3700 Datasheet